FlexEJ Products People

24hr Shipping
On all stock items ordered.
Mon-Thur by 2pm, 10am Fridays

Design & Manufacturing
Full in-house design & manufacture to EN / ASME / PED.

ISO14001 Accreditation
FlexEJ has an accredited Environmental Management System.

Elaflex RedSpot ERP Rubber Bellows

The Elaflex RedSpot ERP rubber bellows features a Butyl (IIR) / EPDM seamless liner with PA textile cord reinforcement and EPDM cover. Suitable for sanitary installations, highly flexible, for cold and warm water, pool water, sea water, drinking water. 

The RedSpot ERP is available from DN25 to DN150 with a wide choice of configuration, flange and restraint options:

How to select a RedSpot ERP Rubber Bellow

Elaflex bellows Temperature & Pressure Temperature is the most critical as it directly influences the choice of rubber – but also the actual pressure capability of the bellows. The stated maximum rated pressure is maintained up to around 50ºC for most rubber bellows, for higher temperatures check the data in the Range tab.

Elaflex RedSpot ERP Restraint options


FlexEJ has the following tie rod restraint options in stock for the RedSpot ERP Rubber Bellows range. Angular and more advanced configurations can be engineered to your exact requirements, however complex. Just let us know what you have in mind.

Without Restraints

(Untied)
Elaflex RedSpot Untied Bellows

WITHOUT RESTRAINTS

No movement restriction, pressure force acts on pipe

The bellows will exert a pressure force on the pipe (see FAQ) as the bellows tries to elongate which must be absorbed at the piping anchors. Any equipment connected to the bellows must have an adequate flange load rating.

Tie rods with outer nuts

(Tied)
Elaflex RedSpot Outer Tied Bellows

TIE RODS WITH OUTER NUTS

No axial extension, pressure force restrained

Tie rods with outer nuts only restrict the elongation of the bellows under pressure and restrains the pressure force. Up to DN300 the tie bars lie elastically in noise-reducing rubber bushes of weatherproof rubber, from DN350 steel spherical washers are provided. The bellows can move laterally. Axial compression is also possible but only if the piping overcomes the pressure force.

Tie rods with inner and outer nuts

(Lateral only)
Elaflex RedSpot Outer & Inner Tied Bellows

TIE RODS WITH INNER AND OUTER NUTS

No axial extension or compression, pressure force restrained

Tie rods with inner and outer nuts both restrict the elongation of the bellows under pressure (restrains the pressure force) and limits axial compression. Up to DN300 the tie bars lie elastically in noise-reducing rubber bushes of weatherproof rubber, from DN350 steel spherical washers are provided. The bellows can move laterally. Axial compression is also possible but only if the piping overcomes the pressure force and a gap is set between the inner nuts and the flange.

Hinges

(Angular only)
Elaflex RedSpot Angular Restraint Bellows

HINGES

Angular movement only, pressure force restrained

The hinge restricts bellows movement to angular only. The pressure force is restrained by the hinge. No axial or lateral movement is possible. Two hinged bellows working together can form a very effective restrained lateral joint with low spring rate capable of very large movements.

Elaflex RedSpot ERP Finders and Calculators


We have a couple of easy to use tools and calculators to help you look up the best RedSpot ERP rubber bellows from our next-day delivery stock items. Our Thermal Expansion Calculator for Piping helps you estimate the increase in length of a pipe run with temperature.

Our Advanced Bellows Finder is another quick way to browse and compare our on-line Elaflex stock range of expansion bellows and joints. With just a few choices you can arrive at the appropriate selection – criteria include pipe size, type, media compatibility, installation length, pressure rating, pipe connection type, conformance and movement axial, lateral and angular. All the products are in the online store with 24hr shipping as standard. If you’re not sure what flange you need, our handy Flange Finder should also be useful.

Stock RedSpot ERP Rubber Bellows Finder

Do search for Elaflex RedSpot expansion bellows by pipe size, intended media and/or connection hardware to see FlexEJ’s stock RedSpot bellows options below but don’t hesitate to call us on 01384 881188 or email us for more bespoke options, sizes and restraint configurations or technical advice.

DN32 (1¼″) Elaflex RedSpot EPDM Rubber Bellows - Length 130 mm
DN32 (1¼″) Elaflex RedSpot EPDM Rubber Bellows – Length 130 mm
DN32 (1¼″) Elaflex RedSpot EPDM Tied Rubber Bellows - Length 130 mm
DN32 (1¼″) Elaflex RedSpot EPDM Tied Rubber Bellows – Length 130 mm
DN40 (1½″) Elaflex RedSpot EPDM Rubber Bellows - Length 130 mm
DN40 (1½″) Elaflex RedSpot EPDM Rubber Bellows – Length 130 mm

Can't quite find the right bellow?
Try our Advanced Bellows Finder

Or call our expert team on +44 (0) 1384 881188. We'll be glad to help.

Can't see what you want? Need help?
Call us. Or use Live Chat.

For instant advice. We can custom-design and engineer almost any expansion joint you need for delivery in the UK or worldwide. Call our expert team on +44 (0) 1384 881188 Or email us sales@flexej.co.uk

Frequently Asked Questions

A. Yes. FlexEJ holds a large stock of the most popular sizes and types of Elaflex rubber bellows as well as our HVAC value bellows range. We also hold stock of the most popular metal bellows for HVAC. Many of these items are available on 24hr delivery from our online web shop. We can also manufacture to order. For sales assistance please contact us or use our Live Chat facility.

A. Our Flange Finder contains details for many common flanges. Typically, to be able to make the identification you need to know the bore size or outside diameter and number of bolts. For technical assistance contact us or use our Live Chat facility.

A. Please refer to our guidelines for installation, anchoring & guides. They are available in the Downloads section of this website: Elaflex Rubber Bellows Installation Instructions and FlexEJ Metal Bellows Installation Instructions. For technical assistance please contact us or use our Live Chat facility.

A. Yes, our Elaflex ERV-R and ERP rubber bellows have WRAS, DVGW and ACS approval for drinking water. The Safetech manufactured to order rubber bellows can be supplied with WRAS approved EPDM linings. Our MRCA copper ended metal expansion joints also have WRAS approval. For technical assistance please contact us or use the LIVE CHAT link on this page.

A. The ERP Redspot, ERV-R Redband and Rotex DoubleRed bellows are now available from FLEXEJDIRECT from stock for the most common sizes and configuration of these popular high-quality bellows. The shop items and can be despatched same day (Monday to Thursday) on a 24hr service if in stock. More advanced configurations and the other nine Elaflex bellows ranges are available to assemble to exact specifications and typically take 7-10 days (depending on size, quantities and configurations required).

Please visit our full FAQ page to see all our frequently asked questions.