FlexEJ Value HVAC Rubber Bellows - Flanged

FlexEJ's Value Flanged rubber bellows are ideal for applications at lower temperatures and pressures where WRAS drinking water approval is not required. Available in lengths of 106, 130 and 150mm (200mm at DN250), DN32 to DN250 : all flanged PN16, tied or untied.

PRODUCT GUIDES

HVAC Rubber Bellows - Flanged

What is a FlexEJ Value HVAC Rubber Bellows?

Value choice for lower temperatures...

  • Materials
    EPDM with galvanised carbon steel flanges with or without tie rods.
  • Application
    Water: LT heating, waste, sanitary, chilled.
  • Rating
    PN16 at +20°C and PN06 at +95°C. Flanged PN16. Lengths of 106 / 130 / 150 / 200mm available.
  • Approvals
    Not approved for drinking water.
Catalogue
Buy Now
HVAC Flanged Rubber Bellows

How to select an HVAC rubber bellows

1 Temperature & Pressure2 Rubber Compatibility3 Diameter and Length4 Flange Drilling & Restraints5 Movements6 Let us help
HVAC Rubber bellows Temperature & Pressure Temperature is the most critical as it directly influences the choice of rubber - but also the actual pressure capability of the bellows. The stated maximum rated pressure is maintained up to around 50ºC for most rubber bellows, for higher temperatures check the data in the Range tab.
HVAC Rubber bellows Rubber CompatibilityThe rubber compound used for the inner layer of the bellows must be compatible with the working fluid. Drinking water requires a WRAS approved EPDM, oils require Nitrile and so on - our Bellows Finder can help you with finding the right rubber.
HVAC Rubber bellows Diameter and LengthMoulded bellows are manufactured in set combinations of diameters and lengths. However, our handmade Safetech range can be manufactured in any diameter and length to suit your application, only the more standard sizes are shown on the Safetech range tab.
HVAC Rubber bellows Flange Drilling & Restraints Any flange drilling can be supplied; if you are uncertain about what you already have installed our Flange Finder will help you identify it. The HVAC and Elaflex ranges have swivel flanges; the Safetech range has full face rubber flanges. Our web shop stock is PN10/16. Bellows will exert a pressure force on the pipe (see FAQ) which must be restrained or absorbed at the piping anchors. All our flanged rubber expansion joints are available with tie rods and we can offer hinges or gimbals on the Elaflex and Safetech products.
HVAC Rubber bellows Movements Moulded rubber bellows have a defined movement range, which is shown for each type in the Range tab, movements listed are non-concurrent (see FAQ). A Safetech bellows will be designed to meet your required movements.
HVAC Rubber bellows Help Call our expert team on +44 (0) 1384 881188 or email us at sales@flexej.co.uk or use Live Chat on this web site - we are here to help, please get in touch.

Can't see what you want? Need help?

Call us. Or use Live Chat.

For instant advice. We can custom-design and engineer almost any expansion joint you need for delivery in the UK or worldwide. Call our expert team on +44 (0) 1384 881188. Or email us sales@flexej.co.uk

Call Us

FlexEJ's Value HVAC Flanged Rubber Bellows

FlexEJ's HVAC rubber bellows offer excellent value for many building services applications.

Swivel PN16 Flanges Tied or Untied
EPDM rubber lining All metal parts galvanised
Choice of lengths 105, 130, 150mm In stock for quick delivery
HVAC Flanged Rubber Bellows

Specifications

 
All sizes available from the web shop...

For detailed specifications please see our catalogue.

Got a quick question?

Use Live Chat. Or call us.

For instant advice use the Live Chat link to message one of the sales team. Or call them direct on +44 (0) 1384 881188

Live Chat

HVAC Rubber Product Comparison Chart

Which HVAC rubber bellows is the best option for your application? Three potential alternatives to consider: :

 

WRAS approved WRAS approved bellows
Is this bellow approved for use in all UK public mains water supplies?

Potable water Potable water
Is this bellow approved for water systems used for drinking and food preparation?

Heating water Heating water
Is this bellow suitable for long-term use in water heating systems at full rated temperature ? Check temperature ratings.

DIN 4809 compliant HT Heating Water DIN4809 compliant
Is this bellow compliant with the German DIN4809 standard of approval for warm water heating systems? (Max 100°C, 10 bar).

Rating barg/°C Pressure & temperature
What is the required pressure rating (in barg) compared to temperature rating for this bellow?

HVAC
Flanged
Rubber bellow
HVAC Rubber Expansion Bellow

16/20° to 6/95°

View

ELAFLEX
RedSpot
Rubber bellow
RedSpot ERP Rubber Expansion Bellow

10/50° to 6/100°

View

ELAFLEX
RedBand
Rubber bellow
RedBand ERV-R Rubber Expansion Bellow

16/50° to 10/100°

View

ELAFLEX
Rotex
Rubber bellow
Rotex DoubleRed Rubber Expansion Bellow

16/70° to 8/130°

View

Not sure what flange spec you need?

Use the FlexEJ Flange Finder to find out

FlexEJ stock a full range of specs and types for our bellows. Or call our expert team on +44 (0) 1384 881188.

Find it
 

Who can you talk to?

Try our sales and customer service team on 01384 881188

They don't bite. And they know what they're talking about. Call the team any time from 9am to 4pm weekdays or use LIVE CHAT if you would prefer a quick text answer. For more complex queries, send us any pro-forma documentation using the get a quote form below or email us sales@flexej.co.uk.

Call Us

Can't quite find the right bellow?

Try the FlexEJ Bellows Finder

Or call our expert team on +44 (0) 1384 881188

Find it

Frequently Asked Questions

Q. Do you hold stock of rubber bellows?
A. Yes. FlexEJ holds a large stock of the most popular sizes and types of Elaflex rubber bellows as well as our HVAC value bellows range. We also hold stock of the most popular metal bellows for HVAC. Many of these items are available on 24hr delivery from our online web shop. We can also manufacture to order. For sales assistance please contact us or use our Live Chat facility.
Q. How do you identify flanges?
A. Our Flange Finder contains details for many common flanges. Typically, to be able to make the identification you need to know the bore size or outside diameter and number of bolts. For technical assistance contact us or use our Live Chat facility.
Q. How do you install a rubber bellows or a metal bellows?
A. Please refer to our guidelines for installation, anchoring & guides. They are available in the Downloads section of this website: Elaflex Rubber Bellows Installation Instructions and FlexEJ Metal Bellows Installation Instructions. For technical assistance please contact us or use our Live Chat facility.
Q. What lengths of rubber bellows do you offer?
A. FlexEJ Value HVAC and Elaflex rubber bellows are stocked in a number of standard lengths from 105mm to 300mm, a summary of lengths, diameters and types can be found on each product page. We also offer fully engineered rubber bellows which are available in custom lengths to suit the application. You can use our bellows finder to find the most suitable product. For technical assistance please contact us or use our Live Chat facility.
Q. Can you match another brand / manufacturer of expansion joint or bellows?
A. Yes, if you have the details we can normally offer an equivalent, our FAQ here gives the information we will need for a full selection. For technical assistance please contact us or use the Live Chat link on this page.
Q. What do I need to know to identify an existing expansion joint or bellows?
A. To identify an existing expansion joint we need to know: nominal bore, overall length and flange type plus service, temperature, pressure and required movement if known. Try our Flange Finder to help identify the flange and you can send us a picture of the existing part using the Contact us form. For technical assistance please contact us or use the LIVE CHAT link on this page.
Q. Do you have rubber bellows for drinking / potable water or with WRAS approval?
A. Yes, our Elaflex ERV-R and ERP rubber bellows have WRAS, DVGW and ACS approval for drinking water. The Safetech manufactured to order rubber bellows can be supplied with WRAS approved EPDM linings. Our MRCA copper ended metal expansion joints also have WRAS approval. For technical assistance please contact us or use the LIVE CHAT link on this page.

Please visit our full FAQ page to see all our frequently asked questions.

Need a detailed quote?

Get A Quote. On us.

We will provide full technical details together with, pricing and shipping timescales. For more complex engineered quotes, preliminary sketches and calculations will be available.

Get A Quote

Gallery

All Pipe Expansion Pressure Fabrication Metal Hose Elaflex Metal Bellows Rubber Bellows Safetech

Got a quick question?

Use Live Chat. Or call us.

For instant advice use the Live Chat link to message one of the sales team. Or call them direct on +44 (0) 1384 881188

Live Chat

Get A Quote

Please complete the short form here and we'll get back to you within 24hrs Monday to Friday (quicker if marked urgent).

Alternatively, you can also call our expert team directly on +44 (0) 1384 881 118 from 8:30AM to 4:30PM weekdays who will be only too pleased to talk through your requirements and technical queries over the phone.

Visitors are also welcome Monday to Friday although please get in touch beforehand to let us know you're coming.













    Please treat this enquiry as: UrgentConfidentialProvisional

    Please confirm we can contact you in the future:
    Yes. Please send updatesNo thanks.


    Industry experience

    FLEXEJ Ltd was formed in 2002 by two professional engineers who brought together an already highly respected design capability with business and commercial skills gained in large multinational companies.

    • Our focus has always been on application and design – helping our customers find the best value solution.
    • We have a strong engineering and manufacturing team with experience in petrochemicals, refining, nuclear, desalination though to HVAC.
    • The team is also very familiar with meeting complex requirements for documentation, in process NDT and test on projects. We have supplied many large end-users such as EDF, Exxon, Shell, Reliance & QatarGas working with major contractors such as JGC, Foster Wheeler & Technip.
    • More 
    FlexEJ Industry Experience